Tamuning Geographic coordinates

Tamuning is in Tamuning, Guam, at latitude 13.48754 and longitude 144.78143. It lies in the northern and eastern hemispheres, near sea level.

Flag of Guam Tamuning, Guam Northern · Eastern Hemisphere
Decimal coordinates Simple standard

13.48754, 144.78143

DD Coodinates Decimal Degrees

13.4875° N 144.7814° E

DMS Coordinates Degrees, Minutes and Seconds

13°29'15.1'' N 144°46'53.1'' E

UTM Universal Transverse Mercator

55P 259840 1492137

Plus Code Open Location Code

7R56FQQJ+2H

Geohash Compact alphanumeric code

x4quwx6de

Latitude and longitude of Tamuning

System Lat. Long.
Decimal standard 13.48754 144.78143
Decimal Degrees (DD) 13.4875° N 144.7814° E
Degrees, Minutes and Seconds (DMS) 13°29'15.1'' N 144°46'53.1'' E
Degrees and Decimal Minutes (DDM) 13°29.252' N 144°46.886' E

Interactive coordinate map

Explore the location of Tamuning: drag the map and watch how the coordinates change.  

Activate Flat Map to use this option.

13.4875° N 144.7814° E
Tamuning Parallel and meridian of Tamuning Distance rings (1,000 / 5,000 / 10,000 km)

Geographic facts about Tamuning

Distance to the equator 1,500 km (932 mi)
Distance to the Greenwich meridian 15,111 km (9,389 mi)
Distance to the North Pole 8,507 km (5,286 mi)
Distance to the South Pole 11,507 km (7,150 mi)
Elevation 20 m (66 ft)
Local time

Cities near the latitude and longitude of Tamuning

Tamuning lies near the same parallel as cities like Tegucigalpa (Honduras) and on the same meridian as cities like Melbourne (Australia).

Map with cities near the latitude or longitude of Tamuning

Cities near the same latitude

Cities near the same longitude

About geographic coordinates

The geographic coordinate system enables any place in the world to be located using its latitude and longitude. The latitude is the position relative to the equator, specifying the north-south position. The longitude specifies the east-west position measured from a reference meridian (usually the Greenwich Prime Meridian). The latitude and longitude of Tamuning have been calculated based on the geodetic datum WGS84.

Besides latitude and longitude, there are other systems to express a location: UTM coordinates divide the world into 60 zones and express positions in meters; the Plus Code is an open short code used by Google Maps; and the geohash is a compact format widely used in software applications.

All formats correspond to the same reference point at the center of Tamuning: opened on a map, it may land on a specific street or spot downtown.

More about Tamuning and Guam

Antipode of Guam → Distances from Guam → Guam Population →